A walk-through installation of the Steeda IRS Bracing on my GT350 / S550 Mustang. While I torqued down the bolts one of them broke off and I had to use an extractor to remove it from the subframe - even simple installs can have their issues!Read More
A walk through of the installation process for a UPR Oil Catch Can with Clean Side Separator on a 2016 Shelby GT350. This same process will work for any other S550 Mustang GT.
- 3/8 in. ratcheting wrench
- 3/8 in. ratchet extension
- 13mm Deep Socket
- 5.5mm socket
Walking through the process of installing a Schroth QuickFit Harness on a Shelby GT350. This same process will work for any other S550 Mustang assuming your seats accommodate the straps properly.
The day(s) is finally here! Grant and Scott install the Roush R2300 TVS 2.3L Supercharger on Grant's 2008 Mustang GT. We also installed the VMP Triple Pass Heat Exchanger. See the overview of the install and the dyno tune and first impressions. More videos to come of this beast in action!
The full build on the car is here.
Grant goes over the install of the single adjustable Motion Control Suspension Coilovers. With Vorshlag Camber/caster plates and hyperco springs. Be sure to follow up with the next episode of the street mod series to see how they handle!
In this video Grant goes over how to get Car Data Telemetry onto your GoPro videos (or any videos for that matter). Please watch the basic OBD2 video on our channel on how to set up a OBD2 Data Recorder! Follow this up with our other video on how to make great sounding car videos to make your own awesome car video! Please Subscribe!
Stuff to buy:
GoPro Microphone Adaptor:
Grant goes over how to make a great sounding car video with a GoPro or Handicam